Drum Dryer
Drum Dryer

Drum Dryer

FOB Price: :US $18,000-310,000/Set

Processing capacity: 0.5-50t/h

Applied material: limestone, fly ash, coal powder, slag, clay.

The Appplication and Description of Drum Dryer:

Drum dryer is mainly used for drying materials with some moisture and granularity in ore beneficiation, building material, metallurgy and chemical department. Drum dryer has high adaptability to the materials so that it can be used for drying all kinds of materials, and in addition, the operation of this equipment is simple and reliable, for this reason, it gets wide application.

Drum Dryer

The Inner Structure and Function of Drum Dryer:

This machine is mainly composed of rotary part, lifting board, transmission part, supporting part and seal ring.  The drum dryer produced by our company uses reasonable running parameters, and the coal and electricity consumption is reduced by over 10-15% and the output per machine is improved by over 10-15%, so that it has been widely used in the cement plants and ore beneficiation plants.

drum_dryer

The drum dryer produced by our company uses new lifting board with many functions of guiding, current sharing and material lifting, and the materials can be comprehensively distributed on the radial sections of the drum dryer and the material curtain is in the thin, average and full state and the materials can fully contact the hot air, thus achieving the aim of making full use of the heat.

drum dryer

The heat source of the drum dryer comes from the combustion device and this dryer uses co-current heating method, so that when the materials to be dried go into the cylinder from the feeding box or feeding chute, they are pushed back by the spiral lifting board. Since the drum dryer is obliquely installed, the materials flow to the lower end of the machine under the gravity and the rotation of the machine, and on the other hand, the materials are repeatedly lifted by the lifting board to the higher end and then spread down constantly, so that the materials will form a even curtain inside the cylinder and conduct heat exchange with the hot air inside the cylinder. Since the materials constantly spread and the water contained in them will be dried, thus achieving the aim of drying.

Technical data

Spec./m
(Dia.×Length)
Capacity
(t/h)
Highest Inlet
Air Temperature
(℃)
Φ1.2×8.0 1.9~2.4 700~800
Φ1.2×10 2.4~3.0 700~800
Φ1.5×12 4.5~5.7 700~800
Φ1.5×14 5.3~6.6 700~800
Φ1.5×15 5.7~7.1 700~800
Φ1.8×12 6.5~8.1 700~800
Φ1.8×14 7.6~9.5 700~800
Φ2.2×12 9.7~12.2 700~800
Φ2.2×14 11.4~14.2 700~800
Φ2.2×16 13.0~16.2 700~800
Φ2.4×14 13.5~16.9 700~800
Φ2.4×18 17.4~21.7 700~800
Φ2.4×20 19.3~24.1 700~800
Φ2.4×22 21.2~26.5 700~800
Φ2.6×24 27.2~34.0 700~800
Φ3.0×20 30.1~37.7 700~800
Φ3.0×25 37.7~47.1 700~800
Φ3.2×25 42.9~53.6 700~800
Φ3.6×28 60.8~76.0 700~800

Technical parameters of indirect heat dryer:

  Shell 
diameter
×shell 
Length  
Items
Shell
 cubage
(m³)
Highest 
inlet air
 temperature
(℃)
Φ1.5×15m 20.27 850
Φ1.5×17m 22.97
Φ1.5×19m 25.68
Φ1.8×21m 35.91 850
Φ1.8×23m 39.33
Φ1.8×25m 42.75
Φ2.2×21m 58.10 850
Φ2.2×23m 63.61
Φ2.2×25m 69.15

Service Support


To build product quality, to enhance service credibility.

  • 30 seconds for connecting customer service
  • 30 minutes for getting technical answer
  • 24 hours for getting free solution plan
Quick Way To Get Price

Note:For product inquiry or order requirements, Please fill the following form, and we will contact you within one business day, and all your information is kept confidential and is not shared with any third parties.

  •  
  •  
  •  
  •  
  •  
  •